The ‘engine’ of the climate ceiling system consists of elements of finely meshed expanded metal on which copper pipe grinders are soldered. In these so-called climate elements, cold or hot water is supplied, depending on whether there is a need for cooling or heating in the room. The heat exchange takes place on the basis of a combination of radiation and convection, which is experienced as very pleasant. With the climate ceiling system you achieve 80% more capacity than with a standard climate ceiling. In addition, the acoustic values are outstanding, thanks to the use of metal panels in combination with acoustical pads. The climate technology is invisibly integrated in the ceiling and the integration of technical appliances such as lighting, ventilation and detection remain possible.

Key Features

Available with linear panel 30BD and 30BXD

Outstanding acoustic performance

Comfortable and even temperature at any time

80% more capacity over a standard climate ceiling

Low exploitation cost

Technical Details

The metal panels 30BD and 30BXD can both be used on the same carrier, also combined. For the climate ceiling modules from 50 to 100, in steps of 10 mm, are available. Module 50 is recommended as an optimum for acoustical and cooling performance. The typical design layout has a grid size of 1200 x 1200 mm. Within this dimension 2 climate panels sized 600 x 1200 mm are installed.

Material Aluminium or steel

Panel dimensions 30BD: 30 x 39 mm

30BXD: 30 x 64 mm

Panel lengths 800 mm to 6000 mm

Standard modules 50, 60, 70, 80, 90 and 100 mm

Perforation options Non-perforated

Perforated (with acoustic non-woven tissue)

End cap Available for all panel types

Recycled content Up to 86% (aluminium)

VOC emission class A+